The impact of horizontal water velocity on the energy consumption of a full‐scale wastewater treatment plant

This study quantifies the impact of the oxidation ditch horizontal water velocity on the energy consumption of a full‐scale wastewater treatment plant (WWTP). A WWTP was modelled by means of the ASM2d platform, showing very good correlation with reference operational data. As to reduce the energy requirements of the plant while guarantying the same nutrient removal performance, two approaches were used. A classical aeration control optimization, yielding a 4% energy reduction, was compared with an increase of the oxidation ditch propelling power. The horizontal water velocity in the oxidation ditches was estimated at only 0.15 m/s. By increasing the horizontal water velocity to 0.3 m/s, an 8% energy reduction could be achieved. Moreover, a synergistic effect for classic control optimization and oxidation ditch water velocity optimization resulted in a 14% energy reduction. Energy spent in propelling power counteracts the aeration energy gain derived by an increase in the oxidation ditch horizontal velocity. An optimum in the water velocity was quantified at 0.3 m/s, comparably with its design value.     

磷石膏料浆专用阀设计

介绍了磷石膏料浆的生产过程及其工况特性,给出了磷石膏料浆专用阀的技术参数、工作原理、结构特点和设计方法。     

叶片抛光表面粗糙度与残余应力优化分析

为了改善发动机叶片的表面粗糙度与残余应力,以提高其工作寿命和机械性能,采用单因素实验结合表面微观形貌分析了各工艺参数对粗糙度与表面残余应力的影响规律;设计关于抛光后钛合金叶片表面粗糙度与残余应力的正交试验,结合单因素实验,分别建立粗糙度与残余应力预测模型,根据预测模型对粗糙度与残余应力进行敏感性分析并划分稳定域;通过灰色关联分析和等权关联分析建立优化模型;结合灵敏度分析所得的最终优选区间,对等权关联优化方法和灰色关联优化方法所得结果进行实验验证与对比分析,研究了两种优化方法所得工艺参数抛光叶片的残余应力随深度变化的规律.结果表明,采用灰色关联模型优化所得的最佳工艺参数对钛合金叶片进行抛光,在满足钛合金叶片抛光表面粗糙度要求的同时保留了较大的残余压应力,证明了该方法是可靠有效的.     

An environmental purpose artificial island off Belgium

Processing municipal and industrial wastes on land and particularly near inhabited centra has met with increased opposition. An apparent remedy to the problem is the establishment of such facilities offshore, hence various projects to build them on artificial islands. The paper examines a concrete proposal to locate such an island offshore from the Belgian Coast. Oceanographic and environmental aspects of the site are discussed, construction methods reviewed, erosion and corrosion effects looked at. The possibility of utilizing ocean power to provide the necessary operation energy is likewise considered.     

Degradation of emergent contaminants by UV,UV/H2O2 and neutral photo-Fenton at pilot scale in a domestic wastewater treatment plant

This study focuses on the removal of 22 selected micropollutants in an effluent from a municipal wastewater treatment plant (MWTP) at pilot scale. A reactor of 37 L with five low pressure mercury lamps emitting at 254 nm (UV₂₅₄) was used. The 22 micropollutants include 15 pharmaceuticals, 2 X-Ray contrast medias, 1 corrosion inhibitor and 4 biocides/pesticides. Five of these 22 compounds were used as indicative substances as proposed by the Swiss Federal Office for the Environment (FOEN) (carbamazepine, diclofenac, sulfamethoxazole, benzotriazole and mecoprop).     

Bacteroidales terminal restriction fragment length polymorphism (TRFLP) for fecal source differentiation in comparison to and in combination with universal bacteria TRFLP

Terminal restriction fragment length polymorphism (TRFLP) is an attractive community analysis method for microbial source tracking (MST) because it is accessible, relatively inexpensive, and can discern multiple fecal sources simultaneously. A new Bacteroidales TRFLP (Bac-TRFLP) method was developed and its source identification performance was evaluated by itself, in comparison to, and in combination with an existing universal bacterial TRFLP method in two laboratories. Sixty-four blind samples from 12 fecal sources (sewage, septage, human, dog, horse, cow, deer, pig, chicken, goose, pigeon, and gull) were used for evaluation. Bac- and Univ-TRFLP exhibited similarly high overall correct identification (>88% and >89%, respectively), excellent specificity regardless of fecal sources, variable sensitivity depending on the source, and stable performance across two laboratories. Compared to Univ-TRFLP, Bac-TRFLP had better sensitivity and specificity with horse, cow, and pig fecal sources but was not suited for certain avian sources such as goose, gull, and pigeon. Combining the general and more targeted TRFLP methods (Univ&Bac-TRFLP) achieved higher overall correct identification (>92%), higher sensitivity and specificity metrics, and higher reproducibility between laboratories. Our results suggest that the Bac-TRFLP and Univ&Bac-TRFLP methods are promising additions to the MST toolbox and warrant further evaluation and utilization in field MST applications.     

Multi-laboratory evaluations of the performance of Catellicoccus marimammalium PCR assays developed to target gull fecal sources

Here we report results from a multi-laboratory (n = 11) evaluation of four different PCR methods targeting the 16S rRNA gene of Catellicoccus marimammalium originally developed to detect gull fecal contamination in coastal environments. The methods included a conventional end-point PCR method, a SYBR^® Green qPCR method, and two TaqMan^® qPCR methods. Different techniques for data normalization and analysis were tested. Data analysis methods had a pronounced impact on assay sensitivity and specificity calculations. Across-laboratory standardization of metrics including the lower limit of quantification (LLOQ), target detected but not quantifiable (DNQ), and target not detected (ND) significantly improved results compared to results submitted by individual laboratories prior to definition standardization. The unit of measure used for data normalization also had a pronounced effect on measured assay performance. Data normalization to DNA mass improved quantitative method performance as compared to enterococcus normalization. The MST methods tested here were originally designed for gulls but were found in this study to also detect feces from other birds, particularly feces composited from pigeons. Sequencing efforts showed that some pigeon feces from California contained sequences similar to C. marimammalium found in gull feces. These data suggest that the prevalence, geographic scope, and ecology of C. marimammalium in host birds other than gulls require further investigation. This study represents an important first step in the multi-laboratory assessment of these methods and highlights the need to broaden and standardize additional evaluations, including environmentally relevant target concentrations in ambient waters from diverse geographic regions.     

Market strategies and core capabilities in the building industry

The objective of this study is to show that the core competence approach has validity when applied to construction. The focus is on the analysis of the fit between market strategies of firms in the building industry and their core capabilities. Certain strategies require specific core capabilities and key external and internal conditions supporting these capabilities. The resource-based approach focuses on the conditions in a firm, the internal capabilities, and supports a core capability that is demanded. The network literature will be related to external conditions that support a core capability of a firm active in a certain market. In a multiple case study, firms are analysed that are involved in different stages of the building process. The case studies demonstrate firms with consistent patterns of market strategies, core capabilities, and supporting internal and external conditions. The specific core capability of the firm under investigation determines the types of external and internal conditions that are critical.